Basket

Accessories






Ladderlimb
Ladderlimb
A simple peg device for holding buckets, power tools & work bags on ladders. Helps maintain 3 points of contact.
Slots into rung hole and holds up to 10kg
Price : £12.00  (Plus VAT)
View






SafeClamp by Rhino (Pair New Mk2 Pattern)
SafeClamp by Rhino (Pair New Mk2 Pattern)
A quick safe way of clamping your ladder or steps to your roof rack. Lockable, fast, corrosion resistant. Sold as a pair of clamps with two keys.
THESE ARE THE NEW MK2 PATTERN CLAMPS.
Price : £37.49  (Plus VAT)
View



Ladder Mitts
Ladder Mitts
A pair of soft rubber mittens that slide over your ladder stiles, assisting in preventing your ladder causing damage property and increasing your safety by helping to stop side ways slippage.
Suits all ladder sides(stiles) up to 80mm x 25mm.
Price : £15.40  (Plus VAT)
View




Corner Standoff
Corner Standoff
An aluminium universal fitting stand-off with a 13” throw. It is quickly attached to your ladder & held detent by a spring hook. It has a corner notch that allows ladders to be positioned on a corner, pole or tree. Stand-offs or ladder stays improve the safety of ladders by altering your posture on the ladder or preventing it resting on an unsafe structure (gutter etc.). An essential accessory for all gutter work or work above the gutter line.
Price : £21.43  (Plus VAT)
View






Stairmaster Ladder Leveler
Stairmaster Ladder Leveler
An aluminium telescopic leg, that slides over and clamps to the side of your ladder allowing it to be leveled in both directions.
Price : £48.13  (Plus VAT)
View



Laddermat
Laddermat
A series of four fold over rubber mats, that can either be used to level your ladder or increase its ground bearing.
Price : £11.30  (Plus VAT)
View



Rojak Ladder Stopper
Rojak Ladder Stopper
This ladder stopper is a top quality aluminium T bonded to an 11mm vulcanised rubber base with a 2mm tread top & bottom. The rubber used is the same compound as a fork lift truck tyre, so its sticky and tough.

Simple, quick and effective.
Available in 2 sizes: 18inches and 24inches

View



Laddermate
Laddermate
This steel device, prevents the base of the ladder slipping by geometry. It simply drops over the bottom rung on the ladder preventing the ladder angle to the floor altering, thus preventing base slippage, simple & effective.
Price : £57.06  (Plus VAT)
View



Ankalad Ladder Stabiliser
Ankalad Ladder Stabiliser
Two telescopic aluminium legs that bolt to your ladder forming very stable tripod base. When not in use they neatly stow down the side of the ladder.
Price : £105.43  (Plus VAT)
View



Roof Rack Clamp pair
Roof Rack Clamp pair
A pair of zinc plated roof rack clamps to hold your equipment safely and securely to your vehicle roof rack. Can be fitted with two pad locks to help deter the opportunist thief.
Price : £16.00  (Plus VAT)
View



Ratchet Strap 6m Hooked 800Kg
Ratchet Strap 6m Hooked 800Kg
1” (25mm) nylon webbing ratchet strap with hooks. Ideal for not only tying your ladder to your vehicle be also securing it during use. If its too long simply cut with scissors & seal with heat. Colours may vary.
Price : £7.25  (Plus VAT)
View



Ratchet Strap 6m Endless 1500Kg
Ratchet Strap 6m Endless 1500Kg
1” (25mm) nylon webbing ratchet strap that makes an endless loop. Ideal for not only tying your ladder to your vehicle be also securing it during use. If its too long simply cut with scissors & seal with heat. Colours may vary.
Price : £6.77  (Plus VAT)
View



10m Rope GPurpose 4mm Poly.
10m Rope GPurpose 4mm Poly.
General duty 4mm rope. An essential item for all ladder users, tying, securing, raising light hand tool etc.
Price : £1.23  (Plus VAT)
View



Quick Release Buckle Strap 2.5m (pair)
Quick Release Buckle Strap 2.5m (pair)
A pair of 25mm wide webbing straps with a metal quick release buckle.
Price : £2.50  (Plus VAT)
View



Scaffolders Harness Kit
Scaffolders Harness Kit
This brand name full body harness with a shock absorbing lanyard comes complete with an aluminium scaffold hook that despite its size is actually lighter in weight than the old steel karabiner’s. Safety Officers frown on the practice of wrapping the lanyard around the fixing point and clipping back on to the lanyard, this scaffold hook easily accommodates 48mm tubing quickly and safely.
Price : £58.00  (Plus VAT)
View



Ladder Stile Covers
Ladder Stile Covers
A pair of soft rubber mittens that slide over your ladder stiles, assisting in preventing your ladder causing damage property and increasing your safety by helping to stop side ways slippage.
Suits all ladder sides(stiles) up to 85mm x 25mm.
Price : £10.94  (Plus VAT)
View




Roof Hook
Roof Hook
This universal trade quality clamp on accessory converts a ladder into a roof ladder.
Price : £21.51  (Plus VAT)
View



Articulated Non Slip Feet pair
Articulated Non Slip Feet pair
Industrial Solid rubber articulating safety feet with moulded studs to help stop base slippage of ladders. Giving a base area of 55mm x 125mm per foot. A good all round safety foot that will both increase your safety and prolong your ladders life. that bolts to the side of your ladder(fixings supplied loose).
Price : £23.32  (Plus VAT)
View



Suction Feet pair
Suction Feet pair
Circular rubber suction feet with die cast aluminium backing castings and zinc-plated steel fixing plates. These perform best on hard smooth floors.
Price : £17.85  (Plus VAT)
View



Suction Foot Rubber each
Suction Foot Rubber each
Replacement circular rubber cups for suction feet.
Price : £2.65  (Plus VAT)
View



Pair Side Spikes cw bolts
Pair Side Spikes cw bolts
A traditional solution to help stop base slippage of ladders. These zinc plated steel side spikes come with all the necessary fixings to attach them to your aluminium ladder.
Price : £11.23  (Plus VAT)
View




Trim 2 Fit Universal replacement insert
Trim 2 Fit Universal replacement insert
A pair of solid rubber universal replacement ladder stile inserts. These are used to replace worn our missing ladder stile inserts. As their name suggests these inserts can be trimmed with the use of a junior hack saw to suit a range of ladder stiles up to a max. of 89mm x 25mm (External), there are guide lines moulded into the inserts to assist with this
Price : £5.25  (Plus VAT)
View



TowerTag (Box 10 + 20 inserts)
TowerTag (Box 10 + 20 inserts)
This product is designed to attach to your portable aluminium scaffold towers to ensure compliance with inspection requirements.
The inspection status of the tower can instantly be seen & recorded.
One Box contains:
10 x Holders, 20 x inserts & 1 x pen
Price : £57.75  (Plus VAT)
View



Laddertag Single
Laddertag  Single
An efficient and professional way of identifying your access equipment. W.A.H.R. require routine inspections and records, to do this you need to be able to uniquely identify each product. Tag text may vary.
Price : £5.19  (Plus VAT)
View




Laddertag (Box 10)
Laddertag  (Box 10)
An efficient and professional way of identifying your access equipment. W.A.H.R. require routine inspections and records, to do this you need to be able to uniquely identify each product. Pack of 10 with one permanent marker. Tag text & packaging may vary.
Price : £46.86  (Plus VAT)
View







LSD Aluminium Stg System (Pair Bkts and Posts)
LSD Aluminium Stg System (Pair Bkts  and  Posts)
This pair of aluminium brackets and handrail posts fits on to the rungs of a ladder allowing them to be spanned by a suitable staging. You must be sure that your ladders are strong enough to sustain the loading that this type of device will exert on them.
Price : £285.00  (Plus VAT)
View



Wall Running Wheels pair
Wall Running Wheels pair
Wheels on the top of your ladder will make it easier to use, safer and last longer. They improve safety by insuring that any movement in the ladder whilst in use is taken up at its top and not the bottom. 100mm(4in) diameter, colours may vary, supplied loose with bolts.
Price : £12.28  (Plus VAT)
View




Helmet Chin Straps
Helmet Chin Straps
Its always good practice to wear head protection when working at height but its no good if your hat falls off or gets knocked off. This simple elastic chin-strap clips on and improves your safety and that of others.
Price : £2.92  (Plus VAT)
View



Helmet to BS5240
Helmet to BS5240
Its always good practice to wear head protection when working at height.
Price : £7.18  (Plus VAT)
View




Pole Bracket (Butterfly)
Pole Bracket (Butterfly)
This solid aluminium bracket bolts to the top of your ladder, allowing it to rest safely against a poles of varing diameter.
Price : £10.40  (Plus VAT)
View



Barrier tape 75mm x 500m roll
Barrier tape 75mm x 500m roll
Non adhesive chevroned barrier tape. Cordoning of your working area to prevent others from injury and you from litigation doesn’t have to the expensive or difficult.
Price : £10.15  (Plus VAT)
View



Safety ~A~ Sign Y1w
Safety ~A~ Sign Y1w
You have a duty of care towards others around you. This sign helps warn others of your presence. When you’re on the move it folds flat
Price : £9.43  (Plus VAT)
View



Replacement Step foot extrusion 280mm
Replacement Step foot extrusion  280mm
This is a 280mm length of `cut to suit` solid rubber 26mm wide step foot extrusion. If you have industrial steps that have worn or missing feet then you can cut replacements from the strip with a hacksaw to replace them.
Price : £13.48  (Plus VAT)
View



Carriage Suppliment
Carriage Suppliment
Highland Suppliment
Price : £9.11  (Plus VAT)
View





©Copyright Ladderman, all information and images are subject to change
SEO and Website Design by Milestone